Heating with a system

Radiator Connection Valves

A complete and comprehensive range of connection valves for plug-in, screw-in and clamping for every application, for single-pipe or two-pipe installations, with or without drain. Whether narrow niches, incorrect connections or too high mounted radiators - our problem solvers are the right assistants for any tricky situation.

Spare parts

Areas of applications: Heating systems


Max. operating pressure: 10 bar
Max. operating temperature: 110 °C permanent temperature, 130 °C short-term

more details
F10010
Product filter
Version
Design
Problem solvers
Connection
Accessories

EXCLUSIV H-module

With ball shut-off, control head with a concealed stop, for connection with compression adapters, 50 mm axial distance.

  • Nickel-plated brass
  • EPDM, PTFE
Heating
Screw-in
F10010
F10016
more details

EXCLUSIV design H-module set

Consisting of EXCLUSIV H-module and design cover in white (similar to RAL 9016) plastic with polished finish.

  • Nickel-plated, plastic
  • EPDM, PTFE
Heating
Screw-in
F10480
more details

EXCLUSIV single valve

With ball shut-off, control head with a concealed stop. With self-sealing connection nipples for radiators with integrated valve, with Rp 1/2 connection.

  • Nickel-plated brass
  • EPDM, PTFE
Heating
Screw-in
F10018 F10019
F10022 F10023
more details

EXCLUSIV single valve

With ball shut-off, control head with a concealed stop. With cone inserts for radiators with integrated valve, with G 3/4 m connection.

  • Nickel-plated brass
  • EPDM, PTFE
Heating
Screw-in
F10020 F10022
F10024 F10025
more details

EXCLUSIV H-module for one-pipe system

Connection valve with backflow retardant, radiator supply ratio 30-100 % (factory set to 35 %), with ball shut-off, control head with a concealed stop, for connection with compression adapters, 50 mm axial distance.
Valve can also be used in two-pipe operation. To this the throttle spindle must be turned to right until it is fully closed. This completely shuts off the bypass.

  • Nickel-plated brass
  • EPDM, PTFE
Heating
Screw-in
F10001
F10007
more details

EXCLUSIV H-module with telescope adjustment

Telescopic connection valve with up to 25 mm height adjustment, with ball shut-off, control head with a concealed stop, for connection with compression adapters, 50 mm axial distance.

  • Nickel-plated brass
  • EPDM, PTFE
Heating
Screw-in
F10084
more details

TECTITE H-module with push-fit connection

Connection valve with integrated TECTITE push-fit connection, for copper (blank and chrome-plated), stainless steel and carbon steel pipes, with ball shut-off, control head with a concealed stop, 50 mm axial distance.

  • Nickel-plated brass
  • EPDM, PTFE
Heating
Push-fit
F10009
more details

TECTITE H-module with telescope adjustment

Telescopic connection valve with up to 25 mm height adjustment, with integrated TECTITE push-fit connection for copper (blank and chrome-plated), stainless steel and carbon steel pipes, with ball shut-off, control head with a concealed stop, 50 mm axial distance.

  • Nickel-plated brass
  • EPDM, PTFE
Heating
Push-fit
F10081
more details

MULTIGRIP H-module

Connection valve with integrated screw connection with depth adjustment (13 mm), for copper, stainless steel and carbon steel pipes, shut-off with stop, 50 mm axial distance.

  • Nickel-plated brass
  • EPDM, PTFE
Heating
Push-fit
F13424
more details

MULTIGRIP H-module with telescope adjustment

Telescopic connection valve with up to 25 mm height adjustment, integrated screw connection with depth adjustment (13 mm), for copper, stainless steel and carbon steel pipes, shut-off with stop, 50 mm axial distance.

  • Nickel-plated brass
  • EPDM, PTFE
Heating
Push-fit
F13444
more details

VARIOCON N connection valve

Can be used as an angle or straight connection valve, left or right connection, with shut-off, for connection with compression adapters, 50 mm axial distance, 25 mm axial offset.

  • Nickel-plated brass
  • EPDM, PTFE
Heating
Screw-in
F12001
F12002
more details

VARIOCON FE connection valve

Can be used as an angle or straight connection valve, left or right connection, draining or filling without adapter, with shut-off, for connection with compression adapters, 50 mm axial distance, 25 mm axial offset.

  • Nickel-plated brass
  • EPDM, PTFE
Heating
Screw-in
F12003
F12004
more details

VARIOCON U connection valve

For one-pipe (radiator supply ratio 25 - 100 %) or two-pipe operation, can be used as an angle or straight connection valve, left or right connection, draining or filling without adapter, with shut-off, for connection with compression adapters, 50 mm axial distance, 25 mm axial offset.

  • Nickel-plated brass
  • EPDM, PTFE
Heating
Screw-in
F10026
F10027
more details

4-way H-module

Shut-off with position indicator, without stop, for connection with compression adapters, 50 mm axial distance.

  • Nickel-plated brass
  • EPDM, PTFE
Heating
Screw-in
F10058
F10449
more details

Reverser with shut-off for reversed supply and return flow

With shut-off, for connection with compression adapters, 50 mm axial distance.

  • Nickel-plated brass
  • EPDM, PTFE
Heating
Screw-in
F10076
F10079
more details

Extension G 3/4 Euro taper

20 mm extension.

  • Nickel-plated brass
  • EPDM
Heating
Screw-in
F22165
more details

S-piece for G 3/4 Euro taper

35 mm total height, 7.5 mm offset, with union nut.

  • Nickel-plated brass
  • EPDM
Heating
Screw-in
F10530
more details

G5 connection set

2 pcs. screw connections.

  • Nickel-plated brass
  • EPDM
Heating
Screw-in
F10370
more details

Thermostatic Heads and Valves - Design Line

Intelligent solutions with a sophisticated design, suitable for any radiator. For simple towel radiators or design radiators - Simplex Design Line thermostatic valves and heads are always the right choice.

Spare parts

Areas of applications: Heating systems


Max. operating pressure: 10 bar
Max. operating temperature: 110 °C permanent temperature
F12060
Product filter
Version
Colour
Design
Accessories
Material

VARIOCON universal regulator valve

With pre-adjustable valve insert, swivelling for angle or straight connection, left or right connection, for connection with compression adapters, axial distance 50 mm, axial offset 25 mm, with adjustment key, connection thread M 30 x 1.5, without thermostatic head. With self-sealing connection nipples and cone inserts for towel and design radiators with Rp 1/2 or G 3/4 m Euro taper connection.

  • Nickel-plated brass
  • EPDM
Heating
Screw-in
F12020
more details

VARIOCON universal regulator valve with electro-thermal actuator

With pre-adjustable valve insert, swivelling for angle or straight connection, left or right connection, for connection with compression adapters, axial distance 50 mm, axial offset 25 mm, with adjustment key, connecting thread M 30 x 1.5, with actuator, closed without current, 230 V, opening/closing time 3 - 4 min., connection cable length 1 m. With self-sealing connection nipples and cone inserts for towel and design radiators with Rp 1/2 or G 3/4 m Euro taper connection.

  • Nickel-plated brass
  • EPDM
Heating
Screw-in
F12018
more details

VARIOCON design universal regulator valve

With pre-adjustable valve insert, swivelling for angle or straight connection, left or right connection, for connection with compression adapters, axial distance 50 mm, axial offset 25 mm, with adjustment key, connection thread M 30 x 1.5, without thermostatic head. With self-sealing connection nipples and cone inserts for towel and design radiators with Rp 1/2 or G 3/4 m Euro taper connection.

  • High gloss chrome-plated brass
  • EPDM
Heating
Screw-in
F12019
more details

VARIOCON design universal regulator valve kit

With pre-adjustable valve insert, swivelling for angle or straight connection, left or right connection, for connection with compression adapters, axial offset 25 mm, with adjustment key, connecting thread M 30 x 1.5, without thermostatic head. With self-sealing connection nipples and cone inserts for towel and design radiators with Rp 1/2 or G 3/4 m euro taper connection.

  • High gloss chrome-plated brass
  • EPDM
Heating
Screw-in
F12016
more details

VARIODESIGN regulator valve set

Consisting of: 1 pc. regulator valve, combines angle and straight design, thermostat convertible for right- or left-side connection, with pre-adjustable valve insert, sensor connection M 30 x 1.5, integrated fill and drain valve for hose connections, for connection with compression adapters, axial distance 50 mm, no axial offset, with adjustment key. With self-sealing connection nipples and cone inserts for towel and design radiators with Rp 1/2 or G 3/4 m Euro taper connection, 1 pc. plastic design cover with polished finsih, 1 pc. SENSITIVE design thermostatic head.

Please find here the video about the VARIODESIGN regulator valve

  • Nickel-plated, plastic
  • EPDM
Heating
Screw-in
F12060
F12061
more details

F11 design compression adapter set for blank, nickel- and chrome-plated copper pipes, carbon steel pipes and stainless steel pipes

2 pcs., for connecting design bathroom valves, suitable for G 3/4 m Euro taper, elastic seal, extended clamp ring for high pull forces, no support sleeves required, nut (wrench size 27 mm), with 2-step technology and fixed stop.

  • High gloss chrome-plated brass
  • EPDM
Heating
Screw-in
F11132
more details

F3 design compression adapter set for plastic and multilayer composite pipes

2 pcs., for connecting design bathroom valves, suitable for G 3/4 m Euro taper, consisting of nut (wrench size 27 mm), plastic clamp ring and sleeve, O-ring seal on the sleeve, with fixed stop.

  • High gloss chrome-plated brass
  • EPDM
Heating
Screw-in
F11482
more details

Design regulator valve, angle design 738

Comap regulator valve, angle design, with pre-adjustable valve insert, sensor connection M 30 x 1.5, for connection with compression adapters, 50 mm axial distance. With connection nipples with O-ring seal, for towel and design radiators with Rp 1/2 connection.

  • Brass
  • EPDM
Heating
Screw-in
C738025
C738014
more details

Design connection nipple

For connecting design bathroom valves, flat seal, self-sealing.

  • High gloss chrome-plated brass
  • EPDM
Heating
Screw-in
F10505
more details

Design regulator valve, straight design 739

Comap regulator valve, straight design, with pre-adjustable valve insert, sensor connection M 30 x 1.5, for connection with compression adapters, 50 mm axial distance. With connection nipples with O-ring seal, for towel and design radiators with Rp 1/2 connection.

  • Brass
  • EPDM
Heating
Screw-in
C739024
C739014
more details

Design thermostatic valve set, angle design D 3804

Consisting of: 1 pc. Comap valve base D3804 with pre-adjustable valve insert, sensor connection M 30 x 1.5, for connection with compression adapters, 1 pc. shut-off lockshield valve, for connection with compression adapters. With connection nipples with O-ring seal, for compact and design radiator with Rp 1/2 connection.

  • Brass
  • EPDM
Heating
Screw-in
C3804314
C3804324
more details

Design thermostatic valve set, straight design D 3805

Consisting of: 1 pc. Comap valve base D3805 with pre-adjustable valve insert, sensor connection M 30 x 1.5, for connection with compression adapters, 1 pc. shut-off lockshield valve, for connection with compression adapters. With connection nipples with O-ring seal, for compact and design radiator with Rp 1/2 connection.

  • Brass
  • EPDM
Heating
Screw-in
C3805314
C3805324
more details

Design thermostatic valve set, double-angle design D3933

Consisting of: 1 pc. Comap valve base D3420 with pre-adjustable valve insert, sensor connection M 30 x 1.5, for connection with compression adapters, 1 pc. shut-off lockshield valve, for connection with compression adapters. With connection nipples with O-ring seal, for compact and design radiator with Rp 1/2 connection.

  • Brass
  • EPDM
Heating
Screw-in
Cl342001001
Cl342002001
more details

SENSITIVE design thermostatic head

Comap thermostatic head M 30 x 1.5 with integrated liquid sensor, modern perforated design, temperature range: 7 °C to 28 °C, frost protection, tested in accordance with DIN EN 215, concealed nut.

  • Plastic, brass
Heating
Screw-in
C102000
C102100
more details

ROTHERM I design thermostatic head

Rossweiner thermostatic head M 30 x 1.5, with liquid sensor, with setting limit, temperature range: 7 °C to 28 °C, frost protection: 7 °C, tested according to DIN EN 215, with zero setting.

  • Plastic, brass
Heating
Screw-in
F35356
more details

Radiator Lockshield Valves

Our radiator connections can be shut off for maintenance without affecting the heating system. Our comprehensive product range has the right highquality Simplex product for every customer.

Spare parts

Areas of applications: Heating systems


Max. operating pressure: 10 bar
Max. operating temperature: 110 °C permanent temperature, 130 °C short-term

more details
F11910
Product filter
Version
Design
Connection
Accessories

Shut-off lockshield valve type M with drain

Self tightening with self-sealing thread, drain and fill without adapter by simply attaching a standard hose connection.

  • Nickel-plated brass
  • EPDM
Heating
Screw-in
F11910
F11907
more details

Shut-off lockshield valve type N

Self tightening with self-sealing thread.

  • Nickel-plated brass
  • EPDM
Heating
Screw-in
F10374
F10382
more details

Shut-off lockshield valve type L for soldering

Self tightening with self-sealing thread.

  • Nickel-plated brass
  • EPDM
Heating
F11756
more details

Screw connection with Euro taper

Self tightening with self-sealing thread, taper elastically sealed.

  • Brass
  • EPDM
Heating
Screw-in
F10318
more details

Extension plug

Self tightening with self-sealing thread.

  • Nickel-plated brass
  • EPDM
Heating
Screw-in
F10822
more details

Compensation sleeve for radiator connection

For length compensation up to 20 mm, with union nut, self tightening with self-sealing thread.

  • Nickel-plated brass
  • EPDM
Heating
Screw-in
F10511
more details

DIN adapter

Including additional blind cap G 3/4 f, with shut-off, for replacing DIN radiators with flat radiators, with connections on bottom left or right.

  • Nickel-plated brass
  • EPDM
Heating
Screw-in
F10550
more details

Compression Adapters

Hardly any other compression adapter is as easy to use as the Simplex compression adapter. The elastic clamping mechanism is gentle on materials.
The minimal torques make these patented compression adapters unique.
Available for all common pipe types and sizes.

Areas of application: Heating system

Compression adapters for metal pipes:
Max. operating pressure: 10 bar
Max. operating temperature: 110 °C permanent temperature, 130 °C short-term

Compression adapters for plastic and multilayer composite pipes:
Pressure or temperature stress according to pipe manufacturer specifications

more details
F11460
Product filter
Version
Material
Accessories

A11 compression adapter set for blank, nickel- and chrome-plated copper pipes, carbon steel pipes and stainless steel pipes

2 pcs., elastic seal, extended clamp rings for high pull forces, no support sleeves required, ribbed nut (wrench size 30 mm), with fixed stop, with 2-step technology (F11174 without 2-step technology).

  • Nickel-plated brass
  • EPDM
Heating
Screw-in
F11171
more details

A1 compression adapter set for blank copper pipes and carbon steel pipes

2 pcs., elastic seal, no support sleeves required, ribbed nut (wrench size 30 mm), recommended tightening torque: 40 Nm.

  • Nickel-plated brass
  • EPDM
Heating
Screw-in
F11187
more details

A3 compression adapter set for plastic and multilayer composite pipes

2 pcs., consisting of ribbed nut (wrench size 30 mm), plastic clamp ring and sleeve, O-ring seal on the sleeve, with fixed stop.

  • Nickel-plated brass
  • EPDM
Heating
Screw-in
F11401
more details

F11 compression adapter set for blank, nickel- and chrome-plated copper pipes, carbon steel pipes and stainless steel pipes

2 pcs., for use behind Simplex baseboards, elastic seal, extended clamp ring for high pull forces, no support sleeves required, nut (wrench size 27 mm), with fixed stop, with 2-step technology (F11124 without 2-step-technology).

  • Nickel-plated brass
  • EPDM
Heating
Screw-in
F11121
more details

F3 compression adapter set for plastic and multilayer composite pipes

2 pcs., for use behind Simplex baseboards, consisting of nut (wrench size 27 mm), plastic clamp ring and sleeve, O-ring seal on the sleeve, with fixed stop.

  • Nickel-plated brass
  • EPDM
Heating
Screw-in
F11460
more details

F11 design compression adapter set for blank, nickel- and chrome-plated copper pipes, carbon steel pipes and stainless steel pipes

2 pcs., for connecting design bathroom valves, suitable for G 3/4 m Euro taper, elastic seal, extended clamp ring for high pull forces, no support sleeves required, nut (wrench size 27 mm), with 2-step technology and fixed stop.

  • High gloss chrome-plated brass
  • EPDM
Heating
Screw-in
F11132
more details

F3 design compression adapter set for plastic and multilayer composite pipes

2 pcs., for connecting design bathroom valves, suitable for G 3/4 m Euro taper, consisting of nut (wrench size 27 mm), plastic clamp ring and sleeve, O-ring seal on the sleeve, with fixed stop.

  • High gloss chrome-plated brass
  • EPDM
Heating
Screw-in
F11482
more details

Compression adapter for copper and carbon steel pipes

Suitable for Simplex valves and Simplex screw connections with female thread. Support sleeves are required for copper and carbon steel pipes.

  • Nickel-plated brass
  • EPDM
Heating
Screw-in
F10352
more details

Connection nipple with Euro taper

Self tightening with self-sealing thread.

  • Brass
  • EPDM
Heating
Screw-in
F10390
more details

D5 connection set with Euro taper

Consisting of 2 pcs. connection nipples G 1/2 m x G 3/4 m, self-sealing.

  • Nickel-plated brass
  • EPDM
Heating
Screw-in
F10391
more details

Angle connection with Euro taper

Self-sealing with connection for compression adapters.

  • Nickel-plated brass
  • EPDM
Heating
Screw-in
F10368
more details

Coupling nipple with Euro taper

  • Brass
Heating
Screw-in
F10393
more details

Angle coupling with Euro taper

  • Nickel-plated brass
Heating
Screw-in
F10387
more details

T-piece with Euro taper

  • Nickel-plated brass
Heating
Screw-in
F10388
more details

Blind plug with Euro taper

  • Brass
Heating
Screw-in
F10706
more details

G5 connection set

2 pcs. screw connections.

  • Nickel-plated brass
  • EPDM
Heating
Screw-in
F10370
more details

Compression Fittings, Metallic Sealed

Whether solar systems, industrial facilities or gas systems - hardly any other compression fittings offer such broad range of applications as the VSH SUPER quality program. The clamp ring makes it possible to make almost any metal pipe connection exactly, reliably and permanently without the use of special tools.

Please find application areas and operating conditions in the technical documentations.

more details
20400576
Product filter
Application
Accessories

Straight coupling S1200/301

  • Brass
HeatingDomestic waterSolarGasCompressed air
Screw-in
20400127
more details

Reduced coupling S1201/301

  • Brass
HeatingDomestic waterSolarGasCompressed air
Screw-in
20400126
more details

Slip coupling without stop S1208/301BP

100 mm, for repairs, without stop.

  • Brass
HeatingDomestic waterSolarGasCompressed air
Screw-in
20400157
more details

Straight coupling with air vent S1250/301V

  • Brass
HeatingDomestic waterSolarGasCompressed air
Screw-in
20400170
more details

Straight connector with male thread S1202/302

Cylindrical male thread in accordance with DIN 228-1. Not approved for domestic water and gas installations!

  • Brass
HeatingSolarCompressed air
Screw-in
20400189
more details

Straight connector with male thread S1202/302TA

Conical male thread in accordance with DIN EN 10226-1.

  • Brass
HeatingDomestic waterSolarGasCompressed air
Screw-in
20400200
more details

Straight connector with female thread S1204/303

Female thread in accordance with DIN EN 10226-1.

  • Brass
HeatingDomestic waterSolarGasCompressed air
Screw-in
20400231
more details

Stop end S1206/323

  • Brass
HeatingDomestic waterSolarGasCompressed air
Screw-in
20400284
more details

Angle adapter 90° S1210/401

  • Brass
HeatingDomestic waterSolarGasCompressed air
Screw-in
20400293
more details

Reduced angle adapter 90° S1211/401

  • Brass
HeatingDomestic waterSolarGasCompressed air
Screw-in
20400292
more details

Angle adapter 90° with air vent S1251/40V

Not approved for gas installations!

  • Brass
HeatingDomestic waterSolarCompressed air
Screw-in
20400336
more details

Angle adapter 90° with male thread S1212/402

Cylindrical male thread in accordance with DIN 228-1. Not approved for domestic water and gas installations!

  • Brass
HeatingSolarCompressed air
Screw-in
20400342
more details

Angle adapter 90° with male thread S1212/402TA

Conical male thread in accordance with DIN EN 10226-1.

  • Brass
HeatingDomestic waterSolarGasCompressed air
Screw-in
20400362
more details

Angle adapter 90° with female thread S1214/403

Female thread in accordance with DIN EN 10226-1.

  • Brass
HeatingDomestic waterSolarGasCompressed air
Screw-in
20400411
more details

Wall plate S1240/403W

Female thread in accordance with DIN EN 10226-1. Not approved for gas installations!

  • Brass
HeatingDomestic waterSolarCompressed air
Screw-in
20400444
more details

T-piece S1220/601EQ

  • Brass
HeatingDomestic waterSolarGasCompressed air
Screw-in
20400454
more details

T-piece reduced S1221/601

  • Brass
HeatingDomestic waterSolarGasCompressed air
Screw-in
20400478
more details

Angle T-piece S1235/601C

Not approved for gas installations!

  • Brass
HeatingDomestic waterSolarCompressed air
Screw-in
20400576
more details

T-piece with male thread S1225/615

Conical male thread in accordance with DIN EN 10226-1.

  • Brass
HeatingDomestic waterSolarGasCompressed air
Screw-in
20400603
more details

T-piece with female thread S1223/617

Female thread in accordance with DIN EN 10226-1.

  • Brass
HeatingDomestic waterSolarGasCompressed air
Screw-in
20400615
more details

T-piece with male thread S1226/631

Conical male thread in accordance with DIN EN 10226-1.

  • Brass
HeatingDomestic waterSolarGasCompressed air
Screw-in
20400650
more details

T-piece with female thread S1224/684

Female thread in accordance with DIN EN 10226-1.

  • Brass
HeatingDomestic waterSolarGasCompressed air
Screw-in
20400664
more details

Crosspiece S1230/901

  • Brass
HeatingDomestic waterSolarGasCompressed air
Screw-in
20400684
more details

Reducing ring S1468/68

One-piece.

  • Brass
HeatingDomestic waterSolarGasCompressed air
Screw-in
20400059
more details

Compression nut for VSH SUPER compression adapters S1280/63

  • Brass
HeatingDomestic waterSolarGasCompressed air
Screw-in
20400003
more details

Compression ring for VSH SUPER compression adapters S1281/65

  • Brass
HeatingDomestic waterSolarGasCompressed air
20400029
more details

Brass support sleeve

  • Brass (dimension 8 mm copper)
HeatingDomestic waterSolarGasCompressed air
20410010
more details

Steel Pipe Adapters

With our assortment of steel pipe adapters you can handle all tricky radiator situations when modernizing living areas. No need to annoying thread tapping or welding. Connections to threaded pipes can be easily made. Glossy nickel-plated steel pipe adapters visually blend with the valves and the diverse selection can be used discreetly.

Areas of application for steel pipe adapters PLUS:
Heating systems and domestic water systems

Max. operating pressure: 10 bar
Max. operating temperature: 110 °C permanent temperature, 130 °C short-term

Area of application for steel pipe adapters 1. generation:
Heating systems
Please find the operating conditions in the mounting instruction.

more Details
F13077
Product filter
Application
Version

Steel pipe adapter for Euro taper for heating systems

Screw connection for G 3/4 m Euro taper, for clamping, for steel pipes in accordance with DIN EN 10255.

  • Nickel-plated brass
Heating
Screw-in
F10348
more details

Steel pipe adapter with Euro taper for heating systems

Screw connection with G 3/4 m Euro taper, for clamping, for steel pipes in accordance with DIN EN 10255.

  • Nickel-plated brass
Heating
Screw-in
F10576
more details

Steel pipe adapter with male thread for heating systems

Screw connection with male thread, for clamping, for steel pipes in accordance with DIN EN 10255.

  • Nickel-plated brass
Heating
Screw-in
F10461
more details

Steel pipe adapter long sleeve for heating systems

Screw connection with male thread and self tightening self-sealing thread, for clamping, for steel pipes in accordance with DIN EN 10255.

  • Nickel-plated brass
  • EPDM
Heating
Screw-in
F10481
more details

Steel pipe adapter with female thread for heating systems

Screw connection with female thread, for clamping, for steel pipes in accordance with DIN EN 10255.

  • Nickel-plated brass
Heating
Screw-in
F10471
more details

Steel pipe adapter with transition for copper, carbon steel and stainless steel pipes for heating systems

For the transition from copper, carbon steel and stainless steel pipes to steel pipes in accordance with DIN EN 10255, for clamping, suitable for stainless steel pipes according to DVGW worksheet GW 541 (DIN EN 10312), carbon steel pipes in accordance with DIN EN 10305 (use support sleeve) and copper pipes in accordance with DIN EN 1057 (for soft copper pipes R220, support sleeves must be used).

  • Brass
Heating
Screw-in
F10570
more details

Steel pipe adapter PLUS with Euro taper for heating and domestic water systems

Screw connection with G 3/4 m Euro taper, for clamping, for steel pipes in accordance with DIN EN 10255.
Highly stress-resistant thanks to proven compression adapter technology.

  • Nickel-plated brass, parts that come in contact with drinking water are left blank
  • EPDM
HeatingDomestic waterOther areas of application
Screw-in
F13063
more details

Steel pipe adapter PLUS with male thread for heating and domestic water systems

Screw connection with male thread and self tightening self-sealing thread, for clamping, for steel pipes in accordance with DIN EN 10255.
Highly stress-resistant thanks to proven compression adapter technology.

  • Nickel-plated brass, parts that come in contact with drinking water are left blank
  • EPDM
HeatingDomestic waterOther areas of application
Screw-in
F13077
more details

Steel pipe adapter PLUS with female thread for heating and domestic water systems

Screw connection with female thread, for clamping, for steel pipes in accordance with DIN EN 10255.
Highly stress-resistant thanks to proven compression adapter technology.

  • Nickel-plated brass, parts that come in contact with drinking water are left blank
  • EPDM
HeatingDomestic waterOther areas of application
Screw-in
F13090
more details

Radiator Plugs

The range includes self-sealing blind, reducing, vent and drain plugs for radiators. Rotatable drain plugs with integrated valves are safe and don't drip. This unique patent will make you shine in front of your customers. With the Simplex selfsealing
thread seal you will see how easily our products are to work with.

Spare parts

Areas of applications: Heating systems


Max. operating pressure: 10 bar
Max. operating temperature: 110 °C permanent temperature, 130 °C short-term

more Details
F10705
Product filter
Application
Version
Features
Accessories

STANDARD blind plug

With O-ring seal.

  • Nickel-plated brass
  • EPDM
Heating
Screw-in
F10703
more details

STANDARD reducing plug

With O-ring seal.

  • Nickel-plated brass
  • EPDM
Heating
Screw-in
F10705
more details

STANDARD A air plug

With O-ring seal.

  • Nickel-plated brass
  • EPDM
Heating
Screw-in
F10711
more details

STANDARD C air plug with swivelling outlet

With O-ring seal.

  • Nickel-plated brass
  • EPDM
Heating
Screw-in
F10714
more details

EXCLUSIV blind plug

Self-sealing.

  • Nickel-plated brass
  • EPDM
Heating
Screw-in
F10803
more details

EXCLUSIV reducing plug

Self-sealing.

  • Nickel-plated brass
  • EPDM
Heating
Screw-in
F10807
more details

EXCLUSIV A air plug

Self-sealing.

  • Nickel-plated brass
  • EPDM
Heating
Screw-in
F10811
more details

EXCLUSIV C air plug with swivelling outlet in metal

Self-sealing.

  • Nickel-plated brass
  • EPDM
Heating
Screw-in
F10814
more details

Metal ventilation key

Square, 5 mm.

  • Nickel-plated metal
Heating
F11202
more details

STANDARD I drain plug with swivelling outlet in plastic

Outlet sleeve for plastic hose, with O-ring seal.

  • Nickel-plated, plastic
  • EPDM
Heating
Screw-in
F10622
more details

EXCLUSIV S drain plug in metal with outlet

Outlet sleeve for plastic hose, self-sealing.

  • Nickel-plated brass
  • EPDM
Heating
Screw-in
F10604
more details

EXCLUSIV R drain plug in metal with hose connection

Blind cap serves as operating key, self-sealing.

  • Nickel-plated brass
  • EPDM
Heating
Screw-in
F10602
more details

EXCLUSIV N drain plug with swivelling outlet in metal

Outlet sleeve for plastic hose, self-sealing.

  • Nickel-plated brass
  • EPDM
Heating
Screw-in
F10627
more details

EXCLUSIV M drain plug with swivelling outlet in metal with hose connection

Blind cap serves as operating key, self-sealing.

  • Nickel-plated brass
  • EPDM
Heating
Screw-in
F10625
more details

A air plug for solar

With heat-resistant FKM O-ring for water-glycol mixes up to 50 % glycol ratio, max. pressure: 10 bar, max. temp.: 180 °C permanent temperature, 200 °C short-term, with O-ring seal.

  • Nickel-plated brass
  • FKM
Solar
Screw-in
F99099
more details

STANDARD V fill and drain plug with swivelling outlet

Blind cap serves as operating key, with O-ring seal.

  • Brass, plastic
  • EPDM
Heating
Screw-in
F10608
F10611
more details

EXCLUSIV fill and drain plug

Draining and filling by attaching a standard hose connection, self-sealing.

  • Nickel-plated brass
  • EPDM
Heating
Screw-in
F10628
more details

Fill and drain plug

Draining and filling by attaching a standard hose connection together with adapter F13447, self-sealing and self-closing, incl. cap.

  • Nickel-plated brass
  • EPDM
Heating
Screw-in
F13446
more details

Adapter for fill and drain plug

Adapter for connecting a standard hose connection to the fill and drain plug F13446.

  • Brass
  • EPDM
Heating
Screw-in
F13447
more details

Blind plug for steel and cast iron radiators

- Light-weight, pressed version
With special flat seal EPDM 2.5 mm
- Heavy version
Cold pressed, with HD seal 1.5 mm, non-stick coating, loose
- White coated version
Similar to RAL 9016, with special flat seal

  • Steel, plastic
Heating
Screw-in
F10901
more details

Air plug for steel and cast iron radiators

- Light-weight, pressed version
Aluminium-coloured housing, rotatable outlet head in white plastic, similar to RAL 9016, with special pressed seal
- White coated version
White housing, rotatable outlet head in white plastic (both similar to RAL 9016), with special pressed seal

  • Steel, plastic
Heating
Screw-in
F10909
more details

Reducing plug for steel and cast iron radiators

- Light-weight, pressed version
With special flat seal EPDM 2.5 mm
- Heavy version
Cold pressed, with HD seal 1.5 mm, non-stick coating, loose
- White coated version
Similar to RAL 9016, with special flat seal

  • Steel, plastic
Heating
Screw-in
F10919
more details

Radiator nipple for steel and cast iron radiators

With right and left thread, HD seal 1 mm, non-stick coating.

  • Steel
  • HD
Heating
Screw-in
F10913
more details