The system for higher demands

Base Boards and Mouldings

The advantages to our system is that it is quick, easy and neat. With our patented mounting bracket, the base board is pressed custom-fit against the wall and held in place. Extensive moulding accessories leave nothing to be desired. The decor diversity is constantly adapted to the latest living trends. Pure white rising pipes profiles complete the range.

more details
Product filter
Base boards and mouldings
Assembly accessories

KOMFORT mounting bracket

Pipe and base board holder, for pipe outside diameter up to 22 mm, with spring clip and pipe lock, without fixing screw, without inserts. Corner cut-out allows for retrofit installation of low voltage lines (e.g. telephone or computer lines).

  • Plastic
Heating
more details

KOMFORT mounting bracket for retrofit installation

Base board holder for retrofit cladding of exposed pipes and cable channels, without fixing screw.

  • Plastic
Heating
more details

KOMFORT PLUS mounting bracket

Base board mounting bracket for installing before and/or after pipe installation. For fixing the Simplex base boards using a folding mechanism. Suitable for pipe outside diameters up to 22 mm. Serves as a pipe clamp and a base board holder. Plastic clamp with film hinge and spring clip for easy installation and even pressing of the base board against the wall. Spring catch for convenient height adjustment. Corner cut-out allows for additional installation of low voltage lines, such as telephone or computer lines, behind the base board. Installation of mounting bracket possible using knock-in anchor D8 mm or appropriate screws. Please order knock-in anchors separately (art. no. F74068 or F74070).

  • Plastic
Heating
more details

Base board N

Sturdy plastic hollow-chamber profile with soft sealing lip to the wall, white and grey base board with a protective film to protect against dirt (remove after installation!), decorative PVC trims with adhesive decorative film. Sold only unmixed in the relevant box size!

  • Plastic
Heating
more details

Outer corner N

  • Plastic
Heating
more details

Inner corner N

  • Plastic
Heating
more details

End piece, left N

  • Plastic
Heating
more details

End piece, right N

  • Plastic
Heating
more details

Butt connector N

  • Plastic
Heating
more details

Base board T with adhesive strips for carpets

Sturdy plastic hollow-chamber profile with soft sealing lip to the wall, white base board with protective film to protect against dirt (remove after installation!), decorative PVC trim with adhesive decorative film, 4 m profile length. Sold only unmixed in the relevant box size!

  • Plastic
Heating
more details

Outer corner T

  • Plastic
Heating
more details

Inner corner T

  • Plastic
Heating
more details

End piece, left T

  • Plastic
Heating
more details

End piece, right T

  • Plastic
Heating
more details

Butt connector T

  • Plastic
Heating
more details

Tubular film for base board

Transport packaging, roll of 180 m.

  • PE
Heating
more details

Notching pliers

Notching pliers for cutting the base board where the pipe passes through.

  • Steel
Heating
more details

Knock-in anchor

For fastening Simplex base board brackets with countersunk head and screw nail, required: 1 pc. per bracket.

  • Galvanized steel, plastic
Heating
more details

Countersunk head screw

For fastening Simplex base board brackets, Phillips screw, used with anchor F74094, required: 1 pc. per bracket.

  • Galvanised steel
Heating
more details

Anchor

For fastening Simplex base board brackets, used with countersunk head screw F74080.

  • Plastic
Heating
more details

Electrical socket box for base board system with electric cable channel

Suitable for standard socket inserts.

  • Plastic
Heating
more details

Electric cable channel

Plastic hollow-chamber profile with soft sealing lip to the floor. Reduction of thermal load through double-walled plastic hollow chamber profile. Additional divider for low current or computer lines. Profile length 4 m.

  • Plastic
Heating
more details

Mounting bracket K for base board system with electric cable channel

Combination base board holder for two pipes up to 22 mm outside diameter and electric cable channel, with spring clip and pipe lock, without fixing screw.

  • Plastic
Heating
more details

Outer corner K for cable channel

  • Plastic
Heating
more details

Inner corner K for cable channel

  • Plastic
Heating
more details

End piece K for cable channel

  • Plastic
Heating
more details

Butt connector K for cable channel

  • Plastic
Heating
more details

Rising pipes profile

For cladding rising pipes, made of plastic hollow-chamber profile, 3 m profile length. Sold only unmixed in the relevant box size!

  • Plastic
Heating
more details

Mounting clip for rising pipes profile

  • Plastic
Heating
more details

Cover for rising pipes profiles

  • Plastic
Heating
more details

Soft lip

For sticking on the rising pipes profile for wall and floor compensation.

  • Plastic
Heating
more details

Inspection flap

With lock, powder coated, for installation in rising pipes profile.

  • Steel
Heating
more details

Base Board Connection Valves and Adapters

The right solution for every pipe connection system. Whether push-fit, press, solder or screw connection, you will find the right connection valve here. Easy installation, for all common radiator manufacturers, 1 to 3-layer versions. Frontal connecting and operating facilitate installation and shorten assembly times. Removable connection technologies ensure easy expansion in the future.

Spare parts

more details
Product filter
Version
Accessories
Material

VK 31 Euro taper connection kit

Base board connection kit with G 3/4 m Euro taper for the connection of copper, carbon steel, stainless steel, plastic and multilayer composite pipes in conjunction with Simplex compression adapters (F series), with self-sealing connection nipples and cone inserts for radiators with integrated valve with Rp 1/2 or G 3/4 m Euro taper connection, basic equipment as described above.

  • Nickel-plated brass
  • EPDM
Heating
Screw-in
more details

Blind cap DN 20

For closing the VK 31 Euro taper connection kit and SL-MULTI on the loop end.

  • Brass
  • SBR
Heating
Screw-in
more details

F11 compression adapter set for blank, nickel- and chrome-plated copper pipes, carbon steel pipes and stainless steel pipes

2 pcs., for use behind Simplex base boards, elastic seal, extended clamp ring for high pull forces, no support sleeves required, nut (wrench size 27 mm), with fixed stop, with 2-step technology (F11124 without 2-step-technology).

  • Nickel-plated brass
  • EPDM
Heating
Screw-in
more details

F3 compression adapter set for plastic and multilayer composite pipes

2 pcs., for use behind Simplex base boards, consisting of nut (wrench size 27 mm), plastic clamp ring and sleeve, O-ring seal on the sleeve, with fixed stop.

  • Nickel-plated brass
  • EPDM
Heating
Screw-in
more details

VK 31 connection kit with press connection

Base board connection kit with press connection for M and V profile, for copper, carbon steel and stainless steel pipes, with self-sealing connection nipples and cone inserts for radiators with integrated valve with Rp 1/2 or G 3/4 m Euro taper connection, basic equipment as described above.

  • Nickel-plated brass
  • EPDM
Heating
Crimp with a V profileCrimp with a M profile
more details

Base board connection with press connection

With press connection for M and V profile, for copper, carbon steel and stainless steel pipes, for radiators with integrated valve, consisting of: 1 pc. supply connection with soldered copper bow (nickel-plated) Ø 12 mm, 1 pc. return connection with soldered copper bow (nickel-plated) Ø 12 mm, 2 pcs. ea. covering rosettes in white, beech and oak dark.

  • Nickel-plated brass
  • EPDM
Heating
Crimp with a V profileCrimp with a M profile
more details

End plugs for VK 31 connection kits with TECTITE push-fit connection and press connection

For closing the last radiator valve on the run of pipes.

  • Nickel-plated brass
Heating
Push-fitCrimp with a V profileCrimp with a M profile
more details

VK 31 UNI connection Kit U/TH/F/H

Base board connection kit with press connection for U, TH, F and H profile, for plastic and multilayer composite pipes, with self-sealing connection nipples and cone inserts for radiators with integrated valve with Rp 1/2 or G 3/4 m Euro taper connection, basic equipment as described above.

See in a video the advantages of the connection Kit

  • Nickel-plated brass
  • EPDM
Heating
Crimp with a U profileCrimp with a TH profileCrimp with a F profileCrimp with a H profile
more details

UNI base board connection U/TH/F/H

With press connection for U, TH, F and H profile, for plastic and multilayer composite pipes, for radiators with integrated valve, consisting of: 1 pc. supply connection with soldered copper bow (nickel-plated) Ø 12 mm, 1 pc. return connection with soldered copper bow (nickel-plated) Ø 12 mm, 2 pcs. ea. covering rosettes in white, beech and oak dark.

  • Nickel-plated brass
  • EPDM
Heating
Crimp with a U profileCrimp with a TH profileCrimp with a F profileCrimp with a H profile
more details

VK 31 connection kit with TECTITE push-fit connection

With TECTITE push-fit connection for copper, carbon steel and stainless steel pipes, with self-sealing connection nipples and cone inserts for radiators with integrated valve with Rp 1/2 or G 3/4 m Euro taper connection, incl. TECTITE demounting tool, basic equipment as described above.

  • Nickel-plated brass
  • EPDM
Heating
Push-fit
more details

Base board connection with TECTITE push-fit connection

With TECTITE push-fit connection for copper, carbon steel and stainless steel pipe, for radiators with integrated valve, consisting of: 1 pc. supply connection with soldered copper bow (nickel-plated) Ø 12 mm, 1 pc. return connection with soldered copper bow (nickel-plated) Ø 12 mm, 2 pcs. ea. covering rosettes in white, beech and oak dark and 1 pc. TECTITE demounting tool.

  • Nickel-plated brass
  • EPDM
Heating
Push-fit
more details

VK 31 SIROCON connection kit

With self-sealing connection nipples and cone inserts for radiators with integrated valve with Rp 1/2 or G 3/4 m Euro taper connection, basic equipment as described above.

  • Nickel-plated brass
  • EPDM
Heating
SIROCON
more details

SIROCON base board connection

For radiators with integrated valve, consisting of:
1 pc. supply connection with soldered copper bow (nickel-plated) Ø 12mm,
1 pc. return connection with soldered copper bow (nickel-plated) Ø 12mm,
2 pcs. ea. covering rosettes in white, beech and oak dark.

  • Nickel-plated brass
  • EPDM
Heating
SIROCON
more details

SIROCON blind adapter

For closing the SIROCON connections on the loop end.

  • Brass
  • EPDM
Heating
SIROCON
more details

SIROCON press adapter for Unipipe U profile

For Unipipe pipes with system guarantee.

  • Brass
  • EPDM
Heating
Crimp with a U profileSIROCON
more details

SIROCON press adapter for M and V profile

For copper, carbon steel and stainless steel pipes.

  • Gun metal
  • EPDM
Heating
Crimp with a V profileCrimp with a M profileSIROCON
more details

SIROCON press adapter for U, F, H and TH profile

For plastic and multilayer composite pipes.

  • Brass, stainless steel
  • EPDM
Heating
Crimp with a U profileCrimp with a TH profileCrimp with a F profileCrimp with a H profileSIROCON
more details

SIROCON universal press adapter

For copper, carbon steel and stainless steel fittings.

  • Brass
  • EPDM
Heating
Crimp with a V profileCrimp with a M profileSIROCON
more details

SIROCON thread coupling with self-sealing male thread

With SIROCON push-fit connection.

  • Brass
  • EPDM
Heating
Screw-inSIROCON
more details

SIROCON thread adapter with female thread

With SIROCON push-fit connection.

  • Brass
  • EPDM
Heating
Screw-inSIROCON
more details

SIROCON thread adapter with self-sealing male thread

With SIROCON push-fit connection.

  • Brass
  • EPDM with slide coating
Heating
Screw-inSIROCON
more details

SIROCON thread adapter with Euro taper

With SIROCON push-fit connection.

  • Brass
  • EPDM
Heating
Screw-inSIROCON
more details

Telescopic angle connection

Adjustable shut-off connection, suitable for Simplex base board connections 12 mm, height adjustment (25 mm), depth adjustment (13 mm), integrated compression adapter 12 x 1 mm.

  • Nickel-plated brass
  • EPDM
Heating
Screw-in
more details

Telescopic angle connection with drain

Adjustable shut-off connection with drain, suitable for Simplex base board connections 12 mm, height adjustment (25 mm), depth adjustment (13 mm), integrated compression adapter 12 x 1 mm, drain can be installed on the right or left, incl. drain plug and blind plug.

  • Nickel-plated brass
  • EPDM
Heating
Screw-in
more details

Covering rosette for base board cut-out

  • Plastic
Heating
more details

SL-MULTI connection kit

With carbon steel connection elbows, galvanised, suitable for all Simplex connection valves as angle versions (except H-module for one-pipe system), e.g. Simplex MULTIGRIP H-module F13424 or Simplex EXCLUSIV H-module F10012.

  • Nickel-plated brass
Heating
Screw-in
more details

Covering rosettes for SL-MULTI base board cut-out

  • Plastic
Heating
more details